PRODUCT CODE: AKN-RSW

 

Vacuum street sweeper machine is designed to clean the streets. It should be manufactured through assembly

of the following required components unto a truck body:

 

- Sweeper control panel

- Brushes

- Sweeper parts

- Garbage and water tanks

- Additional equipment

 

 

1. GARBAGE TANK

- The capacity of the garbage tank will be 4 m3 - 8 m3.

- Floor of the garbage tank will be built with chromium nickel sheets (CrNi) and the joints will be properly and evenly welded.

- The garbage canister will be lifted up and down with the aid of a hydraulic cylinder.

- The garbage canister will be designed to tilt with an angle of 30 degrees during unloading.

- The rear lid will feature a thick sealing to ensure leak tightness.

- Connection of the fan and the hydro motor will feature bedding on the motor compartment surface with the vacuum fan.

- Vacuum fan will be equalized at 3.000 RPM

- Front portion of the garbage canister will be the engine department.

- This section, called the engine department, will be constructed with sound insulation features.

- Engine department will be independent of the garbage tank.

 

2. WATER TANK

- Water storage tank will be independent of the garbage tank and have at least 1.500 liters of volume. Its inner walls will be polyester coated to prevent rusting.

- A suction filter under the water tank allows the operator to remove and install it from backside, easily.

- An emptying/filling valve will be installed inside the water tank.

- A filter will be installed at the filler opening.

- The water tank will feature a level indicator.

- Spray nozzles installed on upper section of the brushes and in the vacuum channel, all will be made of rust free materials.

 

3. AUXILIARY EQUIPMENT ENGINE

- The auxiliary engine will be TURBO diesel.

- It is also equipped with an automatic gas which controlled from the cabin.

- The engine will be equipped with an operating and time clock.

- Required engine gauges (oil, fuel, air, battery, and charge level) will be installed on the control panel which is located inside the cabin.

 

4. VACUUM SUCTION FAN

- The fan will make its suction through the suction channel located at the upper surface of the garbage hopper

- The fan will be closed type and has helix wings.

- Auxiliary engine is coupled of the fan will be moved with redactor.

- The fan’s suction hose will be spring type.

- The vacuum fan will be controlled from the cabin.

 

5. HYDRAULIC PUMP & TANK

- The hydraulic pump safety system during sweeping mode to avoid switched to pressure mode.

- The hydraulic tank capacity will be at least 60 liters.

- The pressure gauge, oil and heat level indicators will be installed.

- A filter system will exist on the liquid suction and return lines.

 

6. FRONT CIRCULAR BRUSH

- A steel wire brush in circular shape will be installed behind front wheels of the vehicle. The hydro motor will

be of at least 250 cmᶟ capacity. The angles of these brushes will be adjustable.

- Circular brush will have a pressing/clearance adjusting system.

- The pressing force will be adjusted based on the conditions of any given garbage mass.

- The circular brush has 450 mm diameter.

- All motions of the brush will be controlled from the cabin.

- There will be spray nozzles around the brush.

- The operating brushes will be lighted through a projector for night time operations.

- The circular brush will be of free oscillation which will allow it to run at a position depending on the slope and

roughness of any given street.

- The circular brushes will be offered optionally with steel alloy or plastic.

- Lowering and lifting speed of the circular brushes will be adjustable.

 

7. MIDDLE SECTION HORIZONTAL CYLINDRICAL BRUSH

- A cylindrical brush (at least 300 mm diameter and 1.300 mm length) will be installed between the wheelbase of the chassis.

- The cylindrical brush will be driven by the hydro motor, made of polypropylene and fully laden.

- It is covered with a rubber gaiter, also have free oscillation and operate synchronously with the circular brush.

 

8. CONTROL PANEL & THE GAUGES

- Control arms and switches will be available inside the driver’s cabin, to switch on/off the auxiliary engine, circular brushes, cylindrical main brush, vacuum fan and hydraulic pumps.

- Required lighting and warning buttons will be available on the control panel.

- All the cords used in the control panel will have socket connectors and identifying labels.

- Function of each switch on the control panel will be clearly identified with a legible label.

 

9. WATER SYSTEM

- There will be a water pump works independently from the auxiliary engine.

- Through a distribution valve, the water pump will canalize the water to the brushes as well as the suction cup and the garbage canister.

- Spray nozzles will be operated through an electric operated valve.

 

10. PORTABLE HOSE

- A portable hose of 4 m length will be available at the rear door of the vehicle.

- The portable hose installed on the rear door of the vehicle will feature a pipe for easy portability.

 

11. HYDRAULIC CYLINDERS

- Hydraulic cylinders will be made of honed steel pipe and chromium shaft, and controlled through an electrohydraulic

valve.

 

12. VACUUM SUCTION SYSTEM

- The Vacuum suction system will be moving up and down pneumatically and will become free motion during touching the ground.

- There will be a lid on the front side of the vacuum suction can automatically open and close.

- The vacuum suction system will be equipped with spray nozzles adjustable from 3 separate spots.

 

13. SAFETY SYSTEMS:

- The equipment will be manufactured for the use on motor-ways and has all safety systems required.

- All moving parts of the vehicle will be safe and conforming to the safety norms of the motor-ways.

- Safety systems on the vehicle will have distinguishing colors.

- All of the safety systems of the vehicle will be properly marked to enable the operator notice them easily.

 

14. ENGINE COMPARTMENT AND THE LIDS

- The engine compartment will have total sound insulation.

- Engine compartment lids will be fully sealed which has feature of snap-on.

- Engine radiator shroud will be in contact with the hood and it will be placed in a way that sucking air from outside from one spot.